VX-150 O
PERATING
M
ANUAL
31
The
VX-150
includes a convenient “Clone” feature, which allows the memory and con-
figuration data from one transceiver to be transferred to another
VX-150
. This can be
particularly useful when configuring a number of transceivers for a public service opera-
tion. Here is the procedure for Cloning one radio’s data to another:
Turn both radios off.
Connect the optional
CT-27
cloning cable between the
MIC/SP
jacks of the two ra-
dios.
Press and hold the
PTT
and
LAMP
key while turning the radio on.
Rotate the
DIAL
to select “
CLONE
.”
Press the [
F
] key, to enter the CLONE mode. “
CLONE
” will appear on the displays of
both radios when the Clone mode is successfully activated in this step.
On the Destination radio, press the
MONI
key (“
SAVING
” will appear on the LCD).
Press the
PTT
key on the Source radio; “
SENDING
” will appear on the Source radio,
and the data is transferred.
If there is a problem during the cloning process, “
C-ERROR
” will be displayed. Check
your cable connections and battery voltage, and try again.
If the data transfer is successful, the Destination radio will return to normal operation;
Turn both radios off and disconnect the
CT-27
. You can then turn the radios back on,
and begin normal operation.
Cloning
Optional Cloning Cable "CT-27"
Содержание VX-150
Страница 41: ...VX 150 OPERATING MANUAL 39 Notes ...
Страница 42: ...VX 150 OPERATING MANUAL 40 Notes ...
