VXA-700 S
PIRIT
O
PERATING
M
ANUAL
50
M
ENU
(
“S
ET
”
)
M
ODE
MENU Listing
A listing of the Menu items available via the SET mode may be found below.
Set Mode Item
1. Scan Lamp
2. Backlight
3. Large Font
4. Contrast
5. Dimmer
6. Meter Symbol
7. Display Mode
8. RX LED
9. TX LED
10. EMG LED
11. Alert LED
12. TEMP LED
1. Beeper
2. Bell
3. Power On Beep
4. ARTS Beep
1. SQL
2. WSQL
3.Resume
4. DW/PRI
5. RX Save
6. Step
7. SQL Type
8. TONE Set
9. DCS Set
10. PRI Time
11. SPECT Width
Function
Enables/Disables the Scan lamp while paused dur-
ing scanning.
Selects the Display illumination Mode.
Selects the frequency display between the “Large
Character” and “Small Character” modes.
Setting of the display contrast.
Setting of the display brightness level.
Selects the S- & TX PO meter symbol.
Selects the display of the sensor units’ information.
Edits the BUSY indicator color.
Edits the TX indicator color.
Edits the Emergency lamp color.
Edits the Weather Alert lamp color.
Edits the Over Heating lamp color.
Select the Keypad beeper tone.
Enables/disables the Bell Ringer function.
Selects the Power-on beep.
Selects the beep option during ARTS operation.
Sets the Squelch threshold level for the AM and FM
Narrow modes.
Sets the Squelch threshold level for the Wide FM
mode.
Selects the Scan Resume mode.
Selects the Dual Watch/Priority Function.
Selects the Receive-mode Battery Saver “sleep” ra-
tio.
Setting of the synthesizer steps.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
Setting of the DCS Code.
Selects the Priority Checking Time.
Selects the visible bandwidth of the Spectrum Ana-
lyzer.
Available Values
ø
On
/Off
Key
/Off/On
Off
/On
00 - 15 (
06
)
LV 1 - LV 4 (
LV 3
)
Four patterns
Off
/Temp/Volt
–
–
–
–
–
On
/DTMF/Off
On/
Off
Off/
1
/2/3
On
/Off
0 - 8
(
2
)
0 - 8
(
1
)
5secs
/Busy
DW
/PRI
ABS
/1:1/1:2/1:3/1:4/1:5/
Off
5k/10k/12.5k/15k/20k/
25k/50k/100k
Off
/T/TSQ/DCS
50 standard
CTCSS tones.
104 standard DCS
codes.
500ms/1s/1.5s/
2s
/
2.5s/3s
±30ch
/±15ch
Set Mode Item
1. RPT Shift
2. Shift Width
3. ARS
4. ARTS
5. ARTS Itvl
6. T.O.T
7. TX Power
1. Lock Mode
2. [MON]
3. [121.5]
4. USER 1
5. USER 2
1. APO
2. Emergency
3. WX Alert
4. TEMP Unit
5. TEMP Check
6. TEMP Set
1. Internal MIC
2. TEMP Offset
3. Clock Shift
Function
Set the Repeater Shift Direction.
Sets the magnitude of the Repeater Shift.
Enables/disables the Automatic Repeater Shift func-
tion.
Enables/disables ARTS operation.
Selects the polling interval during ARTS operation.
Setting of the Time-Out Timer Countdown Time.
Selects the TX Output Power on the FM mode.
Selects the Control Locking lockout combination.
Selects the
MONITOR
button (just below the
PTT
switch) function.
Selects the primary [
121.5
(
HOME
)] key function
Programming the [
USER
] key assignment (momen-
tary-press mode).
Programming the [
USER
] key (press and holding)
assignment.
Selects the Auto Power Off time (time before power
goes off).
Selects the Emergency feature.
Selects the Alert functions when receiving the
Weather Alert Signal on the WX Channel.
Selects the measurement units for the Temperature
sensor.
Enables/Disables the Over-Heating Alarm
Program the threshold temperature for the “High-
Temperature” indicator.
Internal Microphone On/Off
Correcting the Thermometer setting
CPU Clock Shift
Available Values
ø
Simplex
/ –RPT / +RPT
00kHz – 9.95MHz
(
0.6kHz
)
On
/Off
Off
/ RX / TX / TRX
15secs /
25secs
Off
/ 1min / 3min / 5min
Low1 / Low2 / Low3 /
High
DIAL /
KEY
/ KEY+DIAL /
PTT / DIAL+PTT /
KEY+PTT / ALL
MON
/ T.CALL
121.5
/HOME
ANL / TX Power / ARTS /
XFER / SPEC Start /
Large Font/None
Off
/ 0.5h / 1h / 8h
121.5
/ LED+121.5 / LED
Alrt Off
/ Beep / LED /
Beep+LED
°F
/ °C
Off
/ On
[32.0 °F (0 °C)] -
[230.0 °F (110 °C)]
Off
/ On
[–22.8 °F (–12.7 °C)] –
[+22.8 °F (+12.7 °C)]
Off
/ On
1. Display
2. Sound
3. Receiver
4. Transmit
5. Key Set
6. Misc Setup
7. Option
