VXA-700 S
PIRIT
O
PERATING
M
ANUAL
26
S
PECTRUM
S
COPE
M
ONITOR
If you assign the Spectrum Scope Monitor feature to the
key (see page 44), you may view operating activity
on channels above and below the current operating chan-
nel in the VFO mode.
The display indicates the relative signal strength on chan-
nels immediately adjacent to the current operating fre-
quency.
r
Set the radio to the VFO mode by pressing the
key, if necessary.
r
Press (or press and hold
in) the
key to activate
the Spectrum Scope
Monitor.
r
Once the Spectrum Scope Monitor is activated, press
the
key to change the visible bandwidth between
±15 channel and ±30 channel (default: ±30 channels).
The visible bandwidth, however, depends on the se-
lected channel step size, so match the channel step to
those typically used in your area.
r
To turn the Spectrum Scope Monitor off and operate
on the centered (and displayed) channel, simply press
PTT
switch.
Note
: Audio output will be interrupted during Spectrum
Analyzer operation. This is normal.
