VXA-700 S
PIRIT
O
PERATING
M
ANUAL
8
B
EFORE
Y
OU
B
EGIN
Precautions
¦
This apparatus is capable of two-way communication
on channels used for critical aviation safety commu-
nications. Therefore, it is important that this radio be
kept away from children or other unauthorized users
at all times.
¦
When making DC connections via the (optional)
E-
DC-5B
DC cable, be absolutely certain to observe
the proper voltage level and polarity guidelines. Do
not connect this radio directly to any 24 ~ 28 Volt DC
source, nor to AC power of any kind. Connecting the
VXA-700
directly to a source which exceeds 15.0
Volts DC will result in damage to the unit.
¦
Do not dispose of the LI-ion Battery Pack in a fire.
Do not carry a LI-ion Battery Pack in your pocket,
where keys or coins could short the terminals. This
could create a serious fire/burn danger, and possibly
cause damage to the LI-ion pack.
How to Install the Quick Draw Belt Clip
r
Connect the hanger to the rear of the
VXA-700
, with
the notch pointing directly up, using the supplied screw
(Figure 1). Use only the screw included with the clip
to mount the clip to the back of the
VXA-700
!
r
Clip the Quick-Draw Belt Clip onto your belt (Figure
2).
r
To install the
VXA-700
into the Quick-Draw Belt Clip,
align the hanger with the Quick-Draw Belt Clip, and
slide the
VXA-700
into its slot until a click is heard
(Figure 3).
r
To remove the
VXA-700
from the Quick-Draw Belt
Clip, rotate the
VXA-700
180 degrees, then slide the
VXA-700
out from the Quick-Draw Belt Clip (Figure
4).
Figure 1
Figure 2
Figure 3
Figure 4
