Verso KC720-220 Скачать руководство пользователя страница 6

Страница: 6 / 56

Folding For Storage

NOTE — This manual is only meant to act as a guide. KETTLER recommends that your bike
be regularly serviced by a qualified bike mechanic

As Easy As 3—2—1!

3. Unlock and fold the pedals

Using your thumb, compress and hold the spring loaded pedal assembly (3a).

Fold the pedal into its folded position (3b).

Release the pedal assembly making sure it locks into position to secure the pedal (3c).
Repeat for other pedal.

2. Unlock and fold the handlebar assembly

With the stem locking lever in the closed position,
rotate the secondary safety lock to unsecure the stem

locking lever (2a).

Pull stem locking lever away from the stem and fold
down the handlebar assembly (2b-2c).

Note — Always ensure the stem connection is properly
secured before riding.
Check and Adjust Stem Locking Lever regularly. To ad-

just frame locking lever, slowly turn the adjustment bolt
in the stem locking lever using a Phillips head

screwdriver in 1/16 increments. Failure to effectively
adjust the lever could result in the Stem Locking Lever

being too tight or too loose.

Содержание KC720-220

























































Результаты поиска

Содержание KC720-220

Отзывы:

Похожие инструкции для KC720-220

Бренды по названию

Популярные бренды

Verso KC720-220, Руководство пользователя

Результаты поиска

Содержание KC720-220

Отзывы:

Похожие инструкции для KC720-220

Бренды по названию

Популярные бренды