background image

Safety  

A. The Basics 



Always wear a cycling helmet which meets the latest certification standards and is  
appropriate for the type of riding you do.  Always follow the helmet manufacturer’s  
instruction for fit, use and care of your helmet.  Most serious bicycle injuries involve 

head injuries which might have been avoided if the rider had worn an appropriate   
helmet. 



Always do the Mechanical Safety Check before you get on a bike to ride. 



Be thoroughly familiar with the controls of your bicycle: brakes, pedals, shifting. 



Be careful to keep body parts and other objects  away  from  the  sharp  teeth  of       
chainring, the moving chain, the turning pedals and cranks, and the spinning wheels of 
your bicycle. 



Always wear: 



Shoes that will stay on your feet and will grip the pedals.  Make sure that show 
laces cannot get into moving parts, and never ride barefoot or in sandals. 



Bright, visible clothing that is not so loose that it can be tangled in the bicycle 
or snagged by objects at the side of the road or trail. 



Protective eyewear, to protect against airborne dirt, dust and bugs—tinted 
when the sun is bright, clear when its not. 



Don’t jump with your bike.  Jumping a bike, particularly a BMX or mountain bike, can 
be fun; but it can put huge and unpredictable stress on the bicycle and its compo-

nents.  Riders who insist on jumping their bikes risk serious damage, to their bicycles 
as well as to themselves.  Before you attempt to jump, do stunt riding or race with your 
bike, read and understand the Extreme, Stunt or Competition Riding section of this 
manual. 



Ride at a speed appropriate for conditions.  Higher speed means higher risk. 

 

B. Riding Safety 



Obey all rules of the road and all local laws. 



You are sharing the road or the path with others—motorists, pedestrians and other  
cyclists.  Respect their rights. 



Ride defensively.  Always assume that others do not see you. 



Look ahead, and be ready to avoid: 

WARNING: 

The area in which you ride may require specific safety   devices.  It is 

your responsibility to familiarize yourself with the laws of the area where you ride 

and to comply with all applicable laws, including properly equipping yourself and your bike 
as the law requires. 
 

Observe all local bicycle laws and regulations.  Observe regulations about bicycle 

lighting, licensing of bicycles, riding on sidewalks, laws   regulating bike path and trail use, 
helmet laws, child carrier laws, special   bicycle traffic laws.  Its your responsibility to 
know and obey the laws. 

WARNING: 

Failure to wear a helmet when riding may result in serious injury or 

death.

 

15 

Содержание KC720-220

























































Отзывы: