background image

Intended Use of Your Bicycle 

cont’d

 

 

General Purpose Riding 

Condition 2 
 

Bikes designed for riding Condition 1, plus smooth gravel roads and 

improved trails with moderate grades where the tires do not lose ground 
contact 
Intended  For paved roads, gravel or dirt roads that are in good condition, 
and bike paths 
Not Intended For off-road or mountain bike use, or for any kind of jumping.  
Some of these bikes have suspension features, but these features are    

designed to add comfort, not off-road capability.  Some come with relatively 
wide  tires  that  are  well  suited  to  gravel  or  dirt  paths.    Some  come  with     

relatively narrow tires that are best suited to faster riding on pavement.  If you ride on gravel or 
dirt paths, carry heavier loads or want more tire durability talk to your dealer about wider tires. 

 
 
 

 
 
 
 
 
 
 

 

Cross-Country, Marathon, Hardtails 

Condition 3 
 

Bikes designed for riding conditions 1 & 2, plus rough trails, small 

obstacles, and smooth technical areas, including areas where momentary 
loss of tire contact with the ground may occur.  NOT jumping.  All mountain 

bikes without rear suspension are condition 3, and so are some lightweight 
rear suspension models. 
Intended  For cross-country riding and racing which  ranges  from  mild  to     
aggressive over intermediate terrain (i.e. hilly with small obstacles like roots, 
rocks, loose surfaces and hard pack and depressions).  Cross-country and 

marathon equipment (tires, shocks, frames, drive trains) are light-weight, favoring nimble speed 
over brute force.  Suspension travel is relatively short since the bike is intended to move quickly 
on the ground. 

Not Intended For hardcore freeriding, extreme downhill, dirt jumping, slope style, or very            
aggressive or extreme riding.  No spending time in the air landing hard and hammering through 
obstacles. 
Trade Off Cross-country bikes are lighter, faster to ride uphill, and more nimble than all-mountain 
bikes.  Cross-country and marathon bikes trade off some ruggedness for pedaling efficiency and 
uphill speed. 

MAXIMUM WEIGHT LIMIT 

Rider Luggage Total 

Lbs./kg Lbs./kg Lbs./kg 

285/136 30/14 285/129 

For Touring or Trekking 

300/136 55/25 355/161 

44 

Содержание KC720-220

























































Отзывы: