manualshive.com logo in svg

VersaLogic EPM-CPU-10, Справочное руководство, Страница: 9 / 55

Поделиться
Скачать
VersaLogic EPM-CPU-10 Скачать руководство пользователя страница 9

 

 

Table of Contents 

1

.

 Introduction ................................................................................................................. 1 

Description.......................................................................................................................... 1 
Technical Specifications ..................................................................................................... 3 
Technical Support ............................................................................................................... 4 

Repair Service........................................................................................................ 4 

2. Configuration / Operation........................................................................................... 5 

Overview............................................................................................................................. 5 

Electrostatic Discharge .......................................................................................... 5 
Lithium Battery...................................................................................................... 5 

Initial Configuration and Setup........................................................................................... 6 

Recommended Components .................................................................................. 6 
DRAM Module ...................................................................................................... 6 
Cables / Peripheral Devices ................................................................................... 6 

CMOS Setup / Boot Procedure for EPM-CPU-10.............................................................. 7 

3. Reference ..................................................................................................................... 9 

Physical Dimensions........................................................................................................... 9 

Hardware Assembly............................................................................................. 10 
Stack Arrangement .............................................................................................. 10 

External Connectors.......................................................................................................... 11 

Connector Location Diagrams ............................................................................. 11 
Connector Functions and Interface Cables .......................................................... 12 
High Density 80-Pin Cable (JS4)......................................................................... 13 
High Density 80-Pin Cable (JS3)......................................................................... 14 

Jumper Block Locations ................................................................................................... 15 

Jumper Summary ................................................................................................. 16 
Jumper Summary ................................................................................................. 17 

Power Supply.................................................................................................................... 18 

Power Connectors ................................................................................................ 18 
Power Requirements ............................................................................................ 19 
Lithium Battery.................................................................................................... 19 

CPU................................................................................................................................... 20 

Processor Replacement ........................................................................................ 20 
Processor Side Bus Selection............................................................................... 20 
Heat Sink ............................................................................................................. 20 
Processor Power Management............................................................................. 21 

System RAM..................................................................................................................... 22 

Compatible Memory Modules ............................................................................. 22 

CMOS RAM ..................................................................................................................... 23 

Clearing CMOS RAM ......................................................................................... 23 

CMOS Setup Defaults ...................................................................................................... 23 
Real Time Clock ............................................................................................................... 23 

Setting the Clock.................................................................................................. 23 

iii 

Содержание EPM-CPU-10
























































Отзывы:

Нет отзывов