20306750
5
Designer Series Direct Vent Gas Fireplace
INSTALLATION INFORMATION
PRODUCT SPECIFICATIONS
•
This appliance has been certifi ed for use with either
natural or propane gas. See appropriate data plates.
•
This appliance is not for use with solid fuels.
•
The appliance is approved for bedroom or bedsitting
room installations.
•
The appliance must be installed in accordance with local
codes if any. If none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in
Canada.
•
This appliance is mobile home approved.
•
The appliance must be properly connected to a venting
system.
•
The appliance is not approved for closet or recessed
installations.
GAS PRESSURES
HIGH ELEVATIONS
Input ratings are shown in BTU per hour and are certifi ed
without deration for elevations up to 4,500 feet (1,370
m) above sea level.
For elevations above 4,500 feet (1,370 m) in USA,
installations must be in accordance with the current
ANSI Z223.1/NFPA 54 and/or local codes having juris-
diction.
In Canada, please consult provincial and/or local authori-
ties having jurisdiction for installations at elevations
above 4,500 feet (1,370 m).
Natural Propane
(LP)
Inlet Minimum
4.5” w.c.
11.0” w.c.
Inlet Maximum
10.5” w.c.
13.0” w.c.
Manifold Pressure
3.5” w.c.
10.0” w.c.
Figure 1 -
Designer Controls
FP2815
Control Box
Gas Valve
Command
Center
GAS SPECIFICATIONS & ORIFICE SIZE
Max. Min.
Input
Input Orifi ce
Model
Fuel Controls BTU/h BTU/h
Size
PFLDVPNS
Nat.
SCS
37,000 25,000
#31
PFLDVPPS
LP
SCS
35,000 27,000 1.8 mm
STLDVPNS
Nat.
SCS
37,000 25,000
#31
STLDVPPS
LP
SCS
35,000 27,000 1.8 mm
CLLDVPNS
Nat.
SCS
37,000 25,000
#31
CLLDVPPS
LP
SCS
35,000 27,000 1.8 mm
CRLDVPNS
Nat.
SCS
37,000 25,000
#31
CRLDVPPS
LP
SCS
35,000 27,000 1.8 mm
