42
20306750
Designer Series Direct Vent Gas Fireplace
FIREPLACE INSTALLATION
NOTE:
A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
SAFETY BARRIER INSTALLATION
INSTRUCTIONS
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
CERTIFIED
S
AFETY
B
ARRIER
Install the Large Screen
Figure 65
1. Remove screen from packaging.
2. Align the three (3) slots in the top of the screen with
the three (3) tabs on top of the fi rebox. These are
the tabs on which the glass frame hangs. Slide the
screen down onto the tabs.
3. Allow bottom of frame to swing down and attach to
magnets which hold it in place.
Install the Small Screen (PFLDV, CRLDV, CLLDV)
Figure 65
1. Remove screen from packaging.
2. Remove the three (3) screws at the bottom of the
glass frame.
3. Align the three (3) slots in the top of the screen with
the three (3) tabs on top of the fi rebox. These are
the tabs on which the glass frame hangs. Slide the
screen down onto the tabs.
4. Allow bottom of frame to swing down and attach to
magnets which hold it in place.
WARNING: The safety screen barrier must
be installed after the glass front is in place.
It is NOT a replacement for the glass and
the unit must NOT be operated without the
glass in place.
Small
Safety
Barrier
Large
Safety
Barrier
Figure 65
NOTICE
: It is the responsibility of the installer to ensure
the barrier is affi xed to the fi replace at the time of instal-
lation.
