manualshive.com logo in svg

Vermeer S450TX, Быстрый старт


Поделиться
Скачать
background image

S450TX Mini Skid Steer 

Operating the Machine 50-11

Backfilling with the Bucket

Step 1:

Fully lower loader arms.

Step 2:

Use 

Lift

/

Tilt Controls

 to tilt bucket forward until cutting edge of bucket contacts the ground.

Step 3:

Move machine forward to the edge of the hole or trench to push material into it.

Step 4:

Tilt bucket forward as soon as cutting edge is over the rim of the hole or trench to dump material out 
of the bucket.

Step 5:

If necessary, raise loader arms and tilt bucket forward to empty the bucket.

O

PERATING

 

WITH

 O

THER

 V

ERMEER

-A

UTHORIZED

 A

TTACHMENTS

Refer to the attachment manual supplied by the attachment manufacturer for operating and maintenance 
instructions for the attachment and additional instructions that may be required for the S450

TX

.

WARNING: 

The weight of your machine may cause the ground to give way. Machine can 

fall and tip over. Death or serious injury could result. Keep well away from cliff edges. 
Take care when backfilling. Do not go too close to edges. Do not drive or operate on 
unstable ground.

Содержание S450TX





































































































Отзывы:

Нет отзывов

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды

Загрузить еще бренды