Vermeer S450TX Скачать руководство пользователя страница 11

Страница: 11 / 100

S450TX Mini Skid Steer

Receiving and Delivery Report i

Receiving and Delivery Report

EALER

REP

Check or perform the following:

___

Check that all optional and loose items are included with the machine.

___

Check that Operator’s Manual is cabled to machine.

___

Check air cleaner condition.

___

Check engine oil level.

___

Check engine operation.

___

Check machine lubrication.

___

Check bolts for tightness.

___

Check shield installation and condition.

___

Check that auxiliary attachment drive neutral start interlock functions.

___

Check that

Ground Drive Joystick

and

Lift/Tilt Joystick

spring-return to NEUTRAL.

___

Check that Operator Presence system functions.

___

Check that machine does not move when controls are in NEUTRAL and the engine is running at full
throttle (operator standing on foot platform).

___

Check that attachment does not tilt with key in OFF position and tilt lever pushed.

___

Check that loader arms do not lower with key in OFF position and lift lever pushed.

Содержание S450TX





































































































Результаты поиска

Содержание S450TX

Отзывы:

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды

Vermeer S450TX, Быстрый старт

Результаты поиска

Содержание S450TX

Отзывы:

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды