20-8 Controls
S450TX Mini Skid Steer
O
PERATOR
P
RESENCE
S
YSTEM
The Operator Presence system uses a switch in the operator platform to detect the
presence of an operator. The operator must be standing on the operator presence foot
plate
(1)
for the ground drive, lift/tilt functions, or auxiliary attachment drive to be
engaged.
If the operator leaves the platform while the ground drive, lift/tilt functions, and/or
attachment drive are engaged, these functions will stop. If
Lift/Tilt Joystick
is in
FLOAT, it will continue to lower/float. The
Auxiliary Attachment Drive Lever
must be
returned to OFF before ground drive, lift/tilt, and attachment drive can be re-engaged.
The Operator Presence system is intended for your safety and must be maintained in
good functional condition. Contact your Vermeer dealer if it does not function
correctly.
P
ARK
B
RAKE
A spring-applied, hydraulic-released park brake engages the left track when the engine is OFF or the operator
leaves the platform with the engine ON. The brakes will engage within 4" (10 cm) of travel.
B
OOM
L
IFT
/A
TTACHMENT
T
ILT
L
OCKOUT
O
VERRIDE
In the event of a non-functioning machine, the boom can be lowered and the attachment tilted by standing on
operator’s platform, and turning the ignition key to the RUN position and then moving the
Lift/Tilt Joystick
. In
case of a discharged battery, connect jumper battery to the discharged battery posts. Refer to “Jump-Starting
Procedure,”
1
Содержание S450TX
