manualshive.com logo in svg

Vermeer S450TX, Быстрый старт


Поделиться
Скачать
background image

30-2 Transporting the Machine

S450TX Mini Skid Steer

Loading/Unloading

•

Back up the ramp while loading, and drive forward down the ramp while unloading when there is a light 
attachment on the front weighing less than 200 lb (90 kg), such as a standard bucket or forks, or when the 
attachment has been removed. Driving with operator downhill may result in machine tipping backward.

•

Drive forward up the ramp while loading, and back down the ramp while unloading when there is a heavier 
attachment on the front. Driving with the heavy attachment downhill may result in machine tipping 
forward.

•

Always travel on ramp with attachment as low as practical.

•

Never stop or start suddenly while on ramp. Sudden stopping or starting may result in tipping forward or 
backward. Drive slowly and smoothly while on ramp.

•

Avoid steering on ramps. Steering may cause machine to turn suddenly and fall off ramp, or cause ramp to 
move and fall.

•

Position machine and attachments to provide the trailer tongue load recommended by the trailer 
manufacturer.

•

Securely attach loose attachments and machine to trailer.

WARNING: 

Operator’s leg can be crushed if machine is moved rearward while standing 

on the ground. Operator Presence foot plate must function properly. Never attempt to 
move machine with one or both feet on the ground.

WARNING: 

Machine travel stops if foot platform lifts up during machine travel. Sudden 

stops from higher travel speeds could throw you from machine, or the machine could tip 
over. To help avoid sudden stops, keep both feet fully on the platform and stand as far to 
the rear as practical. Slow down when traveling over uneven ground.

Содержание S450TX





































































































Отзывы:

Нет отзывов

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды

Загрузить еще бренды