manualshive.com logo in svg

Vermeer S450TX, Быстрый старт


Поделиться
Скачать
background image

50-8 Operating the Machine

S450TX Mini Skid Steer

Moving Machine with Load

•

When moving the machine with a full bucket, go up or down slope with load (heavy end of machine) facing 
top of slope. When moving the machine with an empty bucket, go up or down slope with bucket (light end of 
machine) facing bottom of slope.

•

Keep bucket level and as low as practical (carry position), raised only enough to clear any ground 
obstructions.

•

Watch terrain and avoid slopes, bumps, or depressions which could make machine unstable. Wherever 
practical, drive directly up or down a slope or curb.

•

Do not overload machine. Refer to “Load Capacities,” 

page 50-1.

•

Avoid double stacked loads. Secure any load that could shift during movement.

•

Additional safety information is provided in this section. Refer to “Driving Safety,” 

page 50-1.

•

Do not step off operator’s platform when loader arms or attachment are raised. Machine stability is reduced 
and may cause machine to tip forward when you step off.

Содержание S450TX





































































































Отзывы:

Нет отзывов

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды

Загрузить еще бренды