manualshive.com logo in svg

Vermeer S450TX, Быстрый старт


Поделиться
Скачать
background image

S450TX Mini Skid Steer 

Transporting the Machine 30-5

Driving off Trailer

Step 1:

Remove tie-down straps or chains.

Step 2:

Prepare machine to be unloaded.

Step 3:

Follow Starting Procedure, 

page 

22-1.

Step 4:

Align machine with the trailer ramps, with the heavy end on the uphill side.

Step 5:

Position loader arms to avoid having to move the attachment while driving down the ramps:

•

Before backing down the ramp, the attachment should be raised so the attachment will not 
contact the ramps as the tracks leave the ramp.

•

Before driving forward down the ramp, the attachment should be raised to prevent the 
attachment from contacting the ground as the machine reaches the end of the ramps.

Step 6:

Slowly move machine down the ramp to the ground. Minimize steering while on the ramps. Steering 
while on the ramps may result in the machine driving off the ramps or cause the ramps to move and 
drop off the trailer deck.

Содержание S450TX





































































































Отзывы:

Нет отзывов

Похожие инструкции для S450TX

Бренды по названию

Популярные бренды

Загрузить еще бренды