OWNER’S MANUAL
25
VERLINDE reserves the right to alter or amend the above information without notice
11/2018
Each adjustment screw (2) corresponds to a TOP or BOTTOM limit position.
Adjustment of the top winding stop point (top limit switch):
Wind the rope to the maximum desired winding point. Stop the winch.
Still in this position, with the help of a suitable screwdriver, turn the adjustment screw (2) until a click
is heard in the contactor.
Adjustment of the bottom unwinding stop point (bottom limit switch):
Unwind the rope until the bottom point, always leaving 3 safety turns on the drum. Stop the winch.
Still in this position, with the help of a suitable screwdriver, turn the adjustment screw (2) until a click
is heard in the contactor.
This range of limit switches also includes a model with 4 positions. If you need more positions, do not
hesitate to consult us.
C. Rotating cam limit switch IP66-67
Before doing anything, turn off the main power supply to the winch.
To set the cams properly, loosen the central screw
of the group of cams. Then set the trigger point
for each cam using their adjustment screws
. The screws are numbered to indicate the cams in
increasing order from the bottom of the group to the top. Retighten the central screw.
