MANUAL OF INSTRUCTIONS
5
VERLINDE reserves the right to alter or amend the above information without notice
09/2021
( <->T )
ACHIEVING A TARE
Once the hook is loaded with the weight to measure, we will press the button
(<->T)
or key
(1)
[ TARE ] of the remote control
:
[ 150]
Tare weight
.
[tArA ]
[
0]
Fix the load to weigh:
[ 2400]
Net weight
.
While we keep the former tare, we will be able to realise several weighings.
Dropping the weight from the tare, the hook will achieve an automatic untaring:
[dEStA]
[
0]
( <->T )
FIXING THE TARE
Once loaded the hoist with the weight to tare, maintain the key
(<->T)
or key
(1)
[ TARE
] of the remote control pressed and release it with the message“FIJA” :
[ 150]
Weight of the tare
.
[tArA ]
[FIJA ]
[
0]
Fix the load to weigh:
[ 2400]
Net weight
.
In this case we will be able to unload the weight of the load and the one of the tare
without losing the value of the latter.
The visor will show us the weight of the tare in negative:
[ -150]
Weight of the tare
.
Different weighings can be done keeping automatically the value of the tare.