MANUAL OF INSTRUCTIONS
3
VERLINDE reserves the right to alter or amend the above information without notice
09/2021
CHARACTERISTICS
The PEV-1 weighing hoist can offer the following configurations:
DISPLAY:
KEYBOARD:
-
LCD visor of 5 digits 1”
-
LED visor of 5 digits 1”
-
(ON/OFF)
-
(->0<-/B)
-
(<->T)
POWER SUPPLY :
-
Pack of internal battery of 8,4V 3,5Ah (external loader).
-
24h service (2 bat loader).
REMOTE CONTROL (optional):
-
TARE
-
ZERO
-
SUM
-
SUBTOTAL
-
TOTAL
-
OFF
ADJUSTMENT THROUGH
SOFTWARE:
CAPACITY.
FRACTION.
DECIMAL POINT
CALIBRATION OF ZERO AND BOTTOM OF SCALE.
NUMBER OF READINGS
CONSTANT OF STABILITY
NUMBER OF DIVISIONS OF RECUPERATION OF ZERO.
WEIGHT THRESHOLD.
MEMORISATION OF ZERO.
AUTOMATIC DSCONNECTION.
COMMUNICATION RS-232-C.
OPTION PRINTER.
ALLOWS OR NOT THE START WITH WEIGHT.
POWER SUPPLY OF CELL OF +5V
SENSIBITIVENESS OF ENTRY OF 1mV/V A 6 mV/V.
RANGE OF IMPEDANCE 58-2000 OHM
MINIMUM VOLTAGE OF ENTRY PER STEP 1,5uV
VOLTAGE OF THE RANGE OF MEASURE 5mV-20mV
INTERNAL CONVERTOR OF 24 BITS.
RESOLUTION OF 30,000 POINTS.
MAXIMUM PRECISION 6000 DIVISIONS.
MAXIMUM ALIGNABILITY 15 ppm FROM THE FULL OF THE SCALE
MAXIMUM NON REPETIBILTY 10 ppm FROM THE FULL OF THE SCALE
THERMIC DRIFT OF THE MINOR GAINS OF 10 ppm/ºC.
THERMIC DRIFT OF THE ZERO MINER THAN 20 ppm/ºC.
MAX. DEAD WEIGHT 50%.
SUBSTRACTIVE TARE IN THE WHOLE SCALE
RANGE OF TEMPERATURE –10ºC... +40ºC.
MAXIMUM WEIGHT OF BOTTOM OF SCALE PLUS 6 DIVISIONS.
CONSUMPTION STANDBY 8 uA, AT WORK 40 mA
FULFILLS THE O.I.M.L. SPECIFICATIONS