background image

User guide

PREVIOUS   

|

   CONTENTS   

|

   NEXT

One Talk

—W60B user guide

24

Important customer information

To avoid electric shock, use caution when 

connecting cables. For example, do not connect 

safety extra-low voltage (SELV) circuits to 

telephone-network voltage (TNV) circuits. LAN 

ports contain SELV circuits, and WAN ports 

contain TNV circuits. Some LAN and WAN ports 

both use RJ-45 connectors.
To avoid electric shock, do not operate the 

product or connect or disconnect cables during 

electrical storms. To avoid electric shock, do not 

use this product in or near water.
To reduce the risk of fire or overheating, keep  

this product in well-ventilated areas, away from 

radiators or other heat sources. Do not block 

cooling vents.
The plug-socket combination must be accessible  

at all times because it serves as the main power- 

disconnecting device.
Use only the manufacturer-provided AC  

adaptor approved for use with this product.  

Use of another AC adaptor may cause a fire  

or explosion.
This product relies on short-circuit (overcurrent) 

protection installed in your home or office.  

Ensure that a fuse or circuit breaker no larger 

than 120 VAC, 15A U.S. is used on the phase 

conductors (all current carrying conductors).
Unplug this product from the wall outlet and refer 

servicing to qualified service personnel under the 

following conditions:

1.  When the power cord or plug is damaged  

or frayed.

2.  If liquid has been spilled into the product.

3.  If the product has been exposed to rain  

or water.

4.  If the product does not operate normally when  

the operating instructions are followed. 

Adjust only those controls that are covered 

by the operating instructions, since improper 

adjustment of other controls may result in 

damage and will often require extensive work 

by a qualified technician to restore the product 

to normal condition.

  

WEEE warning

To avoid the potential effects on the environment 

and human health as a result of the presence of 

hazardous substances in electrical and electronic 

equipment, end users of electrical and electronic 

equipment should understand the meaning of the 

crossed-out wheeled bin symbol. Do not dispose 

of Waste Electrical and Electronic Equipment 

(WEEE) as unsorted municipal waste so that such 

WEEE can be collected separately.

Customer feedback

We are striving to improve our documentation 

quality, and we appreciate your feedback.  

Email your opinions and comments to 

[email protected]

GNU GPL information

Yealink W60 DECT IP phone firmware contains 

third-party software under the GNU General 

Public License (GPL). Yealink uses software 

under the specific terms of the GPL. Please refer 

to the GPL for the exact terms and conditions of 

the license.
The original GPL license, source code of 

components licensed under GPL and used in 

Yealink products can be downloaded online: 

http://www.yealink.com/ GPLOpenSource.

aspx?BaseInfoCateID=293&CateId=293

Copyright

Copyright © 2016 YEALINK NETWORK 

TECHNOLOGY CO., LTD

.

Copyright © 2016 Yealink Network Technology 

CO., LTD. All rights reserved. No parts of this 

publication may be reproduced or transmitted  

in any form or by any means, electronic or 

mechanical, photocopying, recording, or 

otherwise, for any purpose, without the express 

written permission of Yealink Network 

Technology CO., LTD. Under the law, reproducing 

includes translating into another language 

or format.
When this publication is made available on media, 

Yealink Network Technology CO., LTD. gives its 

consent to downloading and printing copies of 

the content provided in this file only for private 

use but not for redistribution. No parts of this 

publication may be subject to alteration, 

modification or commercial use. Yealink Network 

Technology CO., LTD. will not be liable for any 

damages arising from use of an illegally modified 

or altered publication.

Warranty

The specifications and information regarding the 

products in this guide are subject to change  

without notice. All statements, information, and 

recommendations in this guide are believed to be 

accurate and presented without warranty of any 

kind, express or implied. Users must take full 

responsibility for their application of products.
Yealink Network Technology CO., LTD. makes  

no warranty of any kind with regard to this  

guide, including, but not limited to, the implied 

warranties of merchantability and fitness for a 

particular purpose. Yealink Network Technology 

CO., LTD. shall not be liable for errors contained 

herein nor for incidental or consequential 

damages in connection with the furnishing, 

performance, or use of this guide.

Содержание One Talk W56HV



























Отзывы: