VERITAS NetBackupTM 5.0 Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 428

VERITAS NetBackupTM 5.0 Скачать руководство пользователя страница 99

Chapter 2, Configuring Storage Devices

Adding Drives

65

3.

In the dialog enter the following information:

If you assign the wrong parameters for the drive, Media Manager does not detect it, but
an error will occur when the robot mounts media on the wrong drive.

TLH

TLH applies only to NetBackup Enterprise Server.

▼

To specify a drive in a TLH (Tape Library Half-inch) robot

1.

Select TLH.

2.

In the dialog, enter the IBM device number of the drive within the robot.

If you assign the wrong device number Media Manager does not detect it, but an error
will occur when the robot mounts media on the wrong drive.

The appendix, “IBM Automated Tape Library (ATL)” on page 361, has further
information.

TLM

TLM applies only to NetBackup Enterprise Server.

▼

To specify a drive in a TLM (Tape Library Multimedia) robot

1.

Select TLM.

2.

In the dialog, enter the DAS/SDLC drive name of the drive within the robot.

If you assign the wrong drive name Media Manager does not detect it, but an error will
occur when the robot mounts media on the wrong drive.

For

Enter

ACS Number

The index (in ACS library software terms) that identifies the robot that has
this drive.

LSM Number

The Library Storage Module that has this drive.

Panel Number

The robot panel where this drive is located.

Drive Number

The physical number of the drive (in ACS library software terms).

«
...
97
98
99
100
101
...
»

Содержание NetBackupTM 5.0













































































































































































































































































































































































































































Отзывы:

Нет отзывов