VERITAS NetBackupTM 5.0 Скачать руководство пользователя страница 132 | Manualshive

Страница: 132 / 428

VERITAS NetBackupTM 5.0 Скачать руководство пользователя страница 132

Using the Media Management Window

98

NetBackup Media Manager System Administrator’s Guide for Windows

Volumes List

▼

To view the volumes list

❖

Select an item under Volume Pools, Volume Groups, Robots, or Standalone in the
tree pane.

The volumes list is filtered based on the selected item and that information is
displayed in the Volumes pane. Review the Note column for any restrictions.

Volumes List

Column

Description

Note

Media ID

Identifies the volume in six or less alphanumeric characters.
This value is usually assumed to be the same as the external
media ID and should be the same as the recorded media ID for
non-scratch, labeled media.

You specify the media ID when you add volumes to Media
Manager.

Barcode

The alphanumeric representation of the barcode label attached
to a volume. A barcode is used to identify the volume.

Media Type

Media type of the volume. See “Media Manager Media Types”
on page 251 for a list of the supported media types.

Robot Type

Type of robot that contains this volume. See “Media Manager
Robot Types” on page 250 for a list of supported robot types.

NONE in this column means a standalone volume.

Robot Number

Number of the robot that contains this volume. If the volume
is for a standalone drive or the volume is part of a group that
was moved out of a robot (with the intent of being moved
back into a robot), this column contains a hyphen (-).

Robot Control
Host

Name of the host that controls the robot that contains this
volume. This host is providing the robotic control.

If this column contains NONE, there is no specific robot
control host (the robot is controlled from multiple hosts).

If this column is blank, the volume is for a standalone drive.

Applies only to
NetBackup
Enterprise Server.

«
...
130
131
132
133
134
...
»

Содержание NetBackupTM 5.0













































































































































































































































































































































































































































Отзывы:

Нет отзывов