VERITAS NetBackupTM 5.0 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 428

VERITAS NetBackupTM 5.0 Скачать руководство пользователя страница 42

Media Manager Hosts

8

NetBackup Media Manager System Administrator’s Guide for Windows

Master Servers

NetBackup and Media Manager support both master server and media servers. A master
server manages the NetBackup backups, archives, and restores. Media servers typically
provide additional storage by allowing NetBackup to use the storage devices that are
attached.

A master server has Media Manager software installed.

The following point applies only to NetBackup Server.

NetBackup master and media server software are both installed on the same host. This is
the host where NetBackup is installed. In this case, the host acts as both a master and a
media server. All related databases are also located on that host.

The following point applies only to NetBackup Enterprise Server.

You can have multiple master and media servers in your configuration. Typically a master
server controls multiple media servers. You should manage your media servers from the
master server point of view.

Media Servers

A host with Media Manager software installed and devices attached is termed a media
server. The use of Media servers can increase system performance by distributing network
loads.

Media servers can also be referred to as device hosts. Regular media servers are licensed
by VERITAS, and can back up their own data or data from other network clients. Also see
“SAN Media Servers” on page 8.

The following points apply only to NetBackup Enterprise Server.

You can have multiple media servers in your configuration.

A media server can also just be a host that provides the robotic control for a robot (known
as a robot control host).

SAN Media Servers

This is a NetBackup Enterprise Server topic.

VERITAS also licenses SAN media servers that can only back up their own data to shared
drives—no backing up of data residing on other clients is allowed.

«
...
40
41
42
43
44
...
»

Содержание NetBackupTM 5.0













































































































































































































































































































































































































































Отзывы:

Нет отзывов