Pub. # OM20-MSP3-3D
4-32
File Formats (Raw Data)
Below are lists of the file outputs SoilViewer will create depending on the sensor data collected. A
backup of every file is stored in the C:\Veris\Backup directory, should data be inadvertently deleted
from your computer.
Where #### is file name or number.
VPHF####.DAT
Tab delimited text file, no header.
Stores all field pH points, using the latest electrode calibration settings
Long Lat
pH. Average pH1 pH2 Altitude
Speed Sample#
pH average is the average of pH1 and pH2 electrodes
Sample# is incremented each time starting at 0
VPHL####.DAT
Tab delimited text file, no header
Stores all raw mV readings received by controller. This can be useful for post processing data
using alternate electrode calibrations.
Long Lat
mV1 mV2 Altitude
Speed Flag
VPHFW##.DAT
Tab delimited text file, no header
Stores all electrode readings while in the wash state. Can be useful for troubleshooting wash cycle
issues. Not needed for post processing.
Long Lat
mV1 mV2 Cycle State
VSEC####.DAT
Tab delimited text file, no header
Stores EC shallow and EC Deep readings.
Long Lat
EC Shallow EC Deep
Altitude
VSENSE###.RAW
Encrypted file format containing EC, Optical, GPS, and meta data information. Use this file to
upload the EC and Optical results to FieldFusion. . File is required to be sent into Veris for
processing.
