Published in U.S.A.
www.johnsoncontrols.com
ZEC410 VAV Controllers Installation Instructions
Verasys™ and Johnson Controls® are registered trademarks of Johnson Controls
All other marks herein are the marks of their respective owners. © 2017 Johnson Controls
Building Technologies and Solutions
507 E. Michigan Street, Milwaukee, WI 53202
19
•
Check addresses
-
Check for duplicate addresses.
-
Verify that the address range is sequential.
•
Check for sources of interference
•
Check bus voltages:
-
(+) to COM must be within 2.0 to 3.0 VDC
-
(-) to COM must be within 1.5 to 2.54 VDC
-
(+) to (-) must be within 0.3 to 1.0 VDC
Note:
Values may fluctuate due to ongoing communications; this operation is normal provided the voltage is
within the defined range.
Repair Information
If the ZEC410 controller fails to operator within its specifications, replace the unit. For a replacement unit, contact
the nearest Verasys representative.
Technical Specifications
ZEC410 VAV Controller
Product Code Number
LC-ZEC410-xx
Power Supply Requirement
20–30 VAC at 50 to 60 Hz, Class 2 power supply or Safety Extra-Low Voltage (SELV) at
50/60 Hz (20 VAC minimum)
Power Consumption
10 VA, 14 VA maximum
Ambient Conditions
Ambient Operating Conditions: 0 to 50°C (32 to 122°F); 10 to 90% RH condensing
Ambient Storage Conditions: -40 to 85°C (-40 to 185°F); 10 to 90% RH
Processor
20 MHz Renesas® H8S2398 processor
Memory
1 MB flash nonvolatile memory for operating system, configuration data, and operations
data storage and backup
512k Synchronous Random Access Memory (SRAM) for operations data dynamic
memory
Mounting
On a flat surface with screws
Dimensions
(Height x Width x Depth)
140 x 140 x 25 mm (5-1/2 x 5-1/2 x 1 in.)
Shipping Weight
0.30 lb (0.14 kg)
Compliance
United States
UL Listed, File E107041, CCN PAZX, UL 916
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Canada
UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment
Industry Canada Compliant, ICES-003
European Single Point of Contact:
NA/SA Single Point of Contact:
APAC Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
