laser and controller instruction manual
ADDRESS SETTING
In binary systems, there are only two numbers. 0 meaning “OFF” and 1 meaning “ON”. The numbers increase by
multiplying the previous value by 2. Positions from DIP switch #1 to DIP switch #9 signify binary value from a lower to
higher position.
EG LOOP ADDRESS
BINARY
1
1 100000000
2
8 000100000
3 15 111100000
DMX CONTROL TABLE
GENERAL OPERATION
1. If in DMX mode, use the correct DMX address assignment.
2. Connect the projector and DMX512 console with the DMX signal cable. In Stand Alone mode, there is
no DMX input required.
3. Once powered on, the laser emits a beam in 2 seconds.
4. The laser can be controlled to play and edit programs by 1) a DMX controller in DMX mode, by 2) default program in
auto mode, and 3) in sound active mode if the sound sensitivity knob is correctly adjusted.
:
Channel
Function
DMX512 Value
Detail
CH1
Mode
0~20
Close
Laser and scanner
head stop.
21~120
Dynamic Graphics
121~220
Static Graphics
221~255
Sound Active Mode
CH2
Pattern Selection
0~255
40 Patterns
CH3
Pan
0~255
Pan Movement
CH4
Tilt
0~255
Tilt Movement
CH5
Scan Speed
0~255
0 255 fast slow
CH6
Speed of Dynamic pattern
0~255
0 255 fast slow
CH7
Size of Static pattern
0~255
0 255 small big
8129.01 Venue PP laser Instr.indd 4
5/2/08 6:09:26 PM
