laser and controller instruction manual
SAFETY INFORMATION
• Never operate this unit if it has a damaged cord or plug.
• Keep the power cord away from heated surfaces.
• For indoor use only. Keep in a cool dry place with a temperature of not more than 95˚F.
• Continuous operation of over 4 hours will shorten the life of the laser.
• Do not shake the fixture once it is secured in place.
• The lens at the aperture can collect dirt and dust that will decrease the power output. Clean regularly with a soft, dry cloth.
• Do not remove the warranty sticker.
• Do not dismantle the product. There are no user-serviceable parts.
Fuse Replacement:
Disconnect the power plug. Use a screwdriver to unscrew the fuse holder. Take out the burnt fuse and replace it with one
of the same type. Replacing the fuse with a different type will cause damage and will void the warranty.
TECHNICAL SPECIFICATIONS
AC Power:
110VAC 60Hz, Fuse (2A)
Laser:
Wavelength 532nM, 10mW Green
Control System:
High Capacity Micro Processor
Scanner:
Stepper Motor
Working Mode:
DMX, Auto, Sound Active, Master/Slave
DMX Control:
7 Channels
Connector:
3-pin XLR DMX
Size:
L 9.3” x W 6.9” x H 6.4”
Weight:
6.6 lbs. / 3 kg
8129.01 Venue PP laser Instr.indd 2
5/2/08 6:09:26 PM
