SECTION
DATE
SUPERSEDES
TITLE
HT40/50KX
C150
02-21-14E
11-29-12D
DECAL DRAWING & LIST
22181C
®
VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
PART NO.: 15392
DECAL:
DANGER - ELECTROCUTION HAZARD
FUNCTION: To inform the operator that the
machine (crane) represents an
electrocution hazard should it come
too near or in contact with
electrical voltage source.
QUANTITY: 1
PLACEMENT:Left side of rear cover.
PART NO.: 15391
DECAL:
DANGER - NOT PASSENGER LIFT
FUNCTION: To inform the operator not to lift,
support or transport personnel, and to ensure
that crane operator is adequately trained.
QUANTITY: 1
PLACEMENT:Left side of rear cover.
PART NO.: 15390
DECAL:
CAUTION - INSPECT VEHICLE & CRANE
FUNCTION: To inform the operator of key
operating requirements.
QUANTITY: 1
PLACEMENT:Left side of rear cover.
PART NO.: 22499
DECAL:
KNOW YOUR SIGNALS
FUNCTION: To inform the operator of
proper signals.
QUANTITY: 1
PLACEMENT:Right side of rear cover.
15390-D
!
CAUTION
1. INSPECT VEHICLE AND CRANE INCLUDING
OPERATION, PRIOR TO USE DAILY.
2. DO NOT USE THIS EQUIPMENT EXCEPT ON
SOLID, LEVEL SURFACE WITH CRANE
MOUNTED ON FACTORY-RECOMMENDED
TRUCK.
3. BEFORE OPERATING THE CRANE, REFER TO
MAXIMUM LOAD (CAPACITY) CHART ON CRANE
FOR OPERATING (LOAD) LIMITATIONS.
4. DO NOT OPERATE, WALK, OR STAND BENEATH
BOOM OR A SUSPENDED LOAD.
5. UNPLUG PENDANT AND SHUT OFF MASTER
DISCONNECT SWITCH WHEN CRANE NOT IN
USE.
6. FOR TRAVEL, BOOM MUST BE IN STOWED
POSITION.
DANGER
!
THIS CRANE IS NOT A PASSENGER LIFT
IT IS NOT DESIGNED OR INTENDED TO BE USED TO LIFT,
SUPPORT OR OTHERWISE TRANSPORT PERSONNEL.
YOU MUST NOT
OPERATE THIS CRANE UNLESS:
1.
YOU HAVE BEEN TRAINED IN THE SAFE
OPERATION OF THIS CRANE; AND
2.
YOU KNOW AND FOLLOW THE SAFETY AND
OPERATING RECOMMENDATIONS CONTAINED IN
THE MANUFACTURER'S MANUALS, YOUR
EMPLOYER'S WORK RULES, AND APPLICABLE
GOVERNMENT REGULATIONS.
AN UNTRAINED OPERATOR SUBJECTS HIMSELF
AND OTHERS TO
DEATH OR SERIOUS INJURY .
15391-D
THIS MACHINE IS NOT INSULATED
ELECTROCUTION HAZARD
MAINTAIN SAFE CLEARANCES FROM ELECTRICAL
LINES AND APPARATUS. YOU MUST ALLOW FOR
BOOM SWAY, ROCK OR SAG, AND ELECTRICAL
LINE AND LOAD LINE SWAYING.
THIS LIFTING DEVICE DOES NOT PROVIDE PRO-
TECTION FROM CONTACT WITH OR PROXIMITY
TO AN ELECTRICALLY CHARGED CONDUCTOR.
YOU MUST MAINTAIN A CLEARANCE OR AT LEAST 10
FEET BETWEEN ANY PART OF THE CRANE, LOAD
LINE OR LOAD, AND ANY ELECTRICAL LINE OR
APPARATUS CARRYING UP TO 50,000 VOLTS. ONE
FOOT ADDITIONAL CLEARANCE IS REQUIRED FOR
EVERY ADDITIONAL 30,000 VOLTS OR LESS.
DEATH OR SERIOUS INJURY
WILL RESULT FROM
CONTACT OR INADEQUATE CLEARANCE.
15392-E
DANGER
!
Содержание HT45KX-30
