Vents VUT 300 WH EC, Руководство пользователя

Страница: 20 / 32

20
VUT .. WH ЕС
Additional adjustments Additional controller adjustment menu
Date/time Day and time in adjustment menu
Date Date adjustment menu
Тime Time adjustment menu
Correct time 0
PLC timer correction factor per month. If the PLC timer is too fast
or too low, adjust the timer respectively by means of adjusting the
miscoordination time per month. Set the coefficient in seconds
with minus mark if the controller timer is too fast or plus mark if the
controller timer is too slow.
Change
password
2222
Use this function to edit the engineering password. To change the
password (which is shown as “****”) select the first number with
buttons and and press Enter, then enter the second number
with buttons and , then press Enter and so on. To return to the
previous digit entry press Esc. After entering the last number the PLC
saves the new password. From now on every time when you enter
the engineering menu enter the new password. Note: In case of PLC
adjustments reset (refer Eng. Adjust., reset) the engineering password
is set as 2222.
Light Auto
PLC lighting mode. The LCD display illumination is off after some time
period provided that no button were pressed (“Auto” mode) or is on
all the time (“ON” mode).
Adjustment interface Interface parameter
Protocol UNIV. Communications protocol. ModBus or UNIV value is available.
Speed 38,4 Data transfer speed
Devices 126 The number of devices in the network
Number 4 PLC number in the interface network.
Engineering menu
(Engineering adjustment).
Engineering menu contains engineering adjustments protected by
the engineering password (2222 by default).