Vents-us ERV 100, Руководство пользователя

Страница: 9 / 28

9 www.vents-us.com
UNIT DESIGN AND OPERATING PRINCIPLE
The unit operation is as follows: warm polluted air is extracted from indoor to the unit and is cleaned by the extract filter. Then the air
streams through the heat recovery core and is removed outside by the extract fan. The cold intake air from outside flows into the unit
and is cleaned by the supply
filter.
Further the air flows through the heat recovery core and is supplied inside by the supply fan. The recovery core serves as a heat exchanger
for the warm extract air and cold intake air. The air streams remain fully isolated from each other. The heat recovery technology minimizes
heating costs during the cold season.
Assembly drawing for Frigate HRV/ERV 80 and air flow diagram in heat recovery mode
SPEED CONTROL
FUSE 1
FUSE 2
MED LOW
STANDBY
1 2 3 4 5 6 7 8 9 101112
FUSE
FUSE
AIR SUPPLIED TO ROOM
STALE AIR FROM ROOM
FRESH AIR FROM OUTSIDE
UTILIZED EXHAUST AIR
Supply fan
Supply filter
Extract filter
Swivel service panel
Condensate drain pipe
Control unit
Extract fan
Cross-flow heat recovery core
Assembly drawing for Frigate HRV/ERV 80 EC and air flow diagram in heat recovery mode
SPEED CONTROL
FUSE 1
FUSE 2
MED LOW
STANDBY
1 2 3 4 5 6 7 8 9 101112
FUSE
FUSE
AIR SUPPLIED TO ROOM
STALE AIR FROM ROOM
FRESH AIR FROM OUTSIDE
UTILIZED EXHAUST AIR
Supply fan
Supply filter
Extract filter
Swivel service panel
Condensate drain pipe
Control unit
Extract fan
Cross-flow heat recovery core