Vents-us ERV 100, Руководство пользователя

Страница: 16 / 28

16
HRV/ERV 80/100/120/150 (R) (EC) (L)
www.vents-us.com
CONNECTION TO POWER MAINS
The unit is for connection to the fixed installation and rated for connection to 120 V/60 Hz power supply source.
The unit is supplied with a pre-wired power cable and an adapter. It is suitable for connection to any standard earthed outlet.
Connect the unit to power mains via an external automatic circuit breaker installed at the power input and integrated in the house
cabling. Selection of the trip current for the circuit breaker must be based on the power mains technical parameters.
The circuit breaker installation place must provide quick access for emergency shut-down of the unit.
The overload protection is performed by two fuses 3.15A (glass 5x20) and 0.5A (glass 5x20). They are used for overload protection in case
of an overload or a short circuit. To replace the fuse disconnect the ventilation unit from power supply, replace the fuse and check the
ventilation unit as described in the Unit Control section.
Use the fuses with the stated current only.
In case of repeated melting of the cutout fuse please contact the Product Seller.
Connection diagram
A1.1
31
32
10
9
12
11
13
X1
remove jumper
PE
QF1
Automatic
circuit breaker
Timer
~120 V
~120 V
Power
supply
white
black
green
PK to fire
alarm panel
Hot (Black)
Neutral (White)
Load (Red)
ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS PROHIBITED
AND WILL VOID THE WARRANTY.
POWER OFF THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE
UNIT.
THE UNIT MUST BE CONNECTED TO POWER SUPPLY BY A QUALIFIED
ELECTRICIAN.
THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE GIVEN ON THE
MANUFACTURER’S LABEL.