Vents-us ERV 100, Руководство пользователя

Страница: 14 / 28

14
HRV/ERV 80/100/120/150 (R) (EC) (L)
www.vents-us.com
The units are designed for celling mounting.
While installing the unit ensure convenient access for subsequent maintenance and repair.
Keep the recommended minimum distances to the walls for all mounting variants as shown below.
The fasteners are not included in the delivery set and must be purchased separately. While selecting appropriate fasteners consider the
material of the mounting surface as well as the weight of the unit, refer to technical data. Fasteners selection and unit mounting should
be done by service technicians.
To mount the unit to the ceiling use belts rigidly fixed to a horizontal surface or threaded rods and expansion anchors.
min10"
min A
The belts, threaded rods and expansion anchors are not included in the delivery set.
Suspended mounting
1
2
3
To attain the best performance of the unit and to minimize turbulence-induced air pressure losses while mounting connect a straight air
duct section on both sides of the unit.
Minimum straight air duct length:
• equal to 1 air duct diameter on intake side
• equal to 3 air duct diameters on outlet side
If the air ducts are not connected or the connected air ducts are too short, protect the unit parts from ingress of foreign objects by
covering the spigots with a protecting grille or other protecting device with mesh width not more than
1 /
2
” mm to prevent uncontrollable
access to the fans.
Prior to commissioning of the unit make sure it contains no objects.
INSTALLATION AND SET-UP
MODEL DIMENSION A
FRIGATE HRV/ERV 80 (EC)
21”
FRIGATE HRV/ERV 120 (EC)
24”
FRIGATE HRV/ERV 100/150 (EC)
25”
ALL OPERATIONS DESCRIBED IN THIS USER’S MANUAL MUST BE
PERFORMED BY QUALIFIED PERSONNEL ONLY, PROPERLY TRAINED AND
QUALIFIED TO INSTALL AND MAINTAIN VENTILATION EQUIPMENT.
DO NOT ATTEMPT TO INSTALL THE PRODUCT YOURSELF.
IT IS UNSAFE AND IMPOSSIBLE WITHOUT SPECIAL KNOWLEDGE.