VENTOXX RV 25, Инструкция по установке и эксплуатации

Страница: 11 / 34

8
2.5. Installation Instructions for ventilation units Ventoxx RV 30,Ventoxx RV 30s,
Ventoxx RV 25
2.5.1. Tools Needed for Installation
For Installation you will need the following listed tools and protective equipment.
Tools:

Level

Utility knife

Core drilling unit with 235 -240 mm drill bits for retrofitting

Phase tester (electrical fitting)

Screwdriver cross medium size (cover installation)

Wrench Size 10 (mounting outer cover)

Wire stripper (for cable mounting)

Spatula (inserting the control installation box)

Hammer and chisel or drill with drilling crown (inserting the receiving box)
Please, use the following protective equipment for installation:

Wear work gloves

Wear protective goggles

Use hearing protection

Wear head protection

Wear safety shoes
2.5.2. Additional Accessories Needed for Installation
The following additional accessories are required for installation, which are not included in the
package
:

PU installation foam (please, follow the current safety regulations of your country for
using PU installation foam)

Mounting plaster

Various cables(see section 2.5.8 Cabling on page 12 for details)