24
3.2.3. Installation of the Control: Steps 1–7
Step 1
For installation of the control into the wall, two core holes of 65mm diameter (and breaking the
in-between gap) and 70 mm depth are required. The required size of the space for the
installation box is approx. 65 x 65 x 140 mm.
Step 2
Lay the cables and connect them to the system according to the scheme above. The
recommended cable cross section size is 3 x 0.75 mm².
Step 3
Attach the installation box of the control into the wall.
Step 4
Connect the 220V power supply to the power connecting part using the cable connector (4).
Step 5
Connect the 12V lead wire as shown on the picture:
