11
5.3. View measured sensor values
This function is only available if sub-setting 12:DF = 01, see
section 6.2. Further on, you cannot see the measured value of a
sensor that is not active, according to sub-setting 10:SE, see
section 6.2.
Press and hold CLOCK button for 3 seconds to see measured
value of floor (external) sensor. (SET symbol will disappear).
Press and hold ON/OFF button for 3 seconds to see measured
value of room (internal) sensor. (SET symbol will disappear).
6. CHANGING SETTINGS
6.1. System settings
First, turn the thermostat OFF, then press and hold the UP and
DOWN buttons
(5 seconds) until the following is shown in the display.
Содержание VAUFHTC
Страница 1: ......
