25
controlled by using the room sensor, the thermostat must
be placed inside the room.
1.6
Separate the frontside (screen) and the backside (socket)
by pressing lightly on the top middle (opening
mechanism), see fig. 2. Place the screen somewhere safe.
1.7
Connect the heating cable to the connectors 5 and 6 (fig.
3)
1.8
Connect the power supply (L and N) to the connectors 4
and 7 (fig. 3)
1.9
If the floor sensor shall be used, It shall be connected to
the connectors 1 and 2 (fig. 3)
1.10
Connect the heating cable’s earth conductor to the
building’s earth using an approved connector or connect
them together in connector 3 (fig. 3). REMEMBER!
Heating cables shall always be connected to earth.
1.11
Put the backside (socket) in place into the junction box
and fasten by using mounting screws.
1.12
Attach the frontside (screen). CAUTION! Be very careful
when attaching the frontside so the pins don't get bent.
The connector (8 pins) shall fit exactly into the slot. Place
Содержание VAUFHTC
Страница 1: ......
