Operation
Dial the phone number connected to your Comfort Call system.
The Base Station will answer your call after a predetermined number of rings
(page 10).
The greeting will prompt you to enter your Security Access Code. Voice
recognition does not work to enter this code, you must use the telephone keypad.
Status Report:
After your access code is accepted, the status of the
thermostat/equipment will be announced as follows:
You are controlling thermostat number 1 (2, 3 or 4)*
The inside temperature is xx degrees
The outside temperature is yy degrees**
The thermostat is in (Heat, Cool, Auto, Program or Off)
and
(is Idle, the Heat
is running or the Cool is running)
The auxiliary output is now on/off***
Main Menu:
The Base Station will give you the following options:
For Comfort Settings press
1
or say:
Comfort Settings
For Energy Savings Settings press
2
or say:
Energy Savings
To control the Auxiliary Output, press
3
or say: A
uxiliary Output
***
To control the next thermostat, press
4
or say:
Next Thermostat
*
To leave your thermostat and hang up, press
9
or say:
Hang Up
To return to the Main Menu, press
0
or say:
Main Menu
*This announcement will only occur if more than one thermostat is linked to the
Base Station
(page 16)
.
**The outdoor temperature will only be announced if an outdoor sensor is connected.
***The status of the Auxiliary Output will only be announced if Comfort Call has been
configured to control the thermostat’s auxiliary output
(page 17 and 18)
.
Page 14
