9
OPERATION
Read and understand
this entire owner’s manual, including
all safety information on
pages 2 and 3
, before
plugging in
or
using
this product. Failure to do so could result in
electric shock, fire, serious injury, or death.
Power
Make sure the ON/OFF switch, located on the control panel, is in the OFF position. Plug the power
cord into a 110~120 Volt 15 Amp grounded outlet (see
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3
). Make sure the outlet is in good condition and that the plug is not loose.
NEVER
exceed the maximum amperage for the circuit.
DO NOT
plug other appliances into the same circuit.
Control Panel
Control Panel (left)
ON/OFF 750W 1500W
Control Panel (right)
ON/OFF 750W 1500W
BUTTON
ACTION / FUNCTION
INDICATION / RESULT
ON/OFF
1. Open right panel door. Press once to
enable control panels.
2. Press again to shut off power.
1. Power light and
flame effect
turn on.
Control panels are enabled.
2. Power light turns off. All power is off.
1. Turn knob clockwise (right) to increase
flame effect brightness.
2. Turn knob counter-clockwise (left) to
reduce flame effect brightness.
1. Flame effect will gradually get brighter.
2. Flame effect will gradually get dimmer.
750W
1. With ON/OFF switch on, press once for
low heat (750W).
2. Press again to turn off low heat.
1. Heater and fan turn on low (750W).
2. Low heat turns off.
1500W
1. With ON/OFF and 750W switches on,
press once for high heat (1500W).
2. Press again to turn off high heat.
1. Heater and fan turn on high (1500W).
2. High heat turns off. Low heat stays on.
1. Turn knob clockwise (right) to increase
thermostat setting.
2. Turn knob counter-clockwise (left) to
decrease thermostat setting.
3. Once desired room temperature is
reached, turn knob left until you hear “click.”
1. Heater will turn off when thermostat
setting is reached.
2. Flame effect continues to darken each
time the button is pushed.
3. Heater will turn on and off to maintain
this temperature setting.
Meijer.com