6
STEP 3.
Thread a frame screw (2) through each plastic connector on side panels (C) and into pre-
drilled holes in front panels D and E. Secure with Phillips screwdriver. DO NOT over-tighten.
STEP 4.
Thread a frame screw (2) through each plastic connector on panel assemblies (C/D and
C/E) and into pre-drilled holes in base (B). Secure with Phillips screwdriver. DO NOT over-tighten.
C
2
You will need:
x 6
E
D
C
2
2
2
2
2
C
2
You will need:
x 4
E
D
C
2
2
2
B
REAR
REAR
Meijer.com