8
INSERT INSTALLATION
ALWAYS unplug
this fireplace insert
before installing, cleaning, or relocating it.
Failure to do so could result in
electric shock
,
fire
, or
personal injury
.
STEP 1.
Slide electric fireplace insert carefully into mantel from behind until flange is flush with
mantel wall and insert is centered in front opening. Thread a mounting screw (5) through each
mounting clip (4) and into pre-drilled holes in header panel (F). Thread a frame screw (2) through
each plastic connector (1) and into pre-drilled holes in base (B) on each side of insert. Tighten with
Phillips screwdriver. Check to make sure insert is secure and does not move about.
ANT-TIP SAFETY KIT INSTALLATION
WARNING!
This cable
may reduce possible
risk of injury
if the fireplace is improperly
handled. But
, it is not a substitue for
proper adult supervision
. N
EVER leave
children unattended near this product!
2
4
4
5
5
2
B
F
You will need:
x 3
x 3
x 2
x 2
1
1
4
5
4
1. Drill a 5/16” hole in the wall. Insert the
plastic wall anchor into the hole and gently
tap it in until it is flush with the wall. (If a wall
stud is present, the wall anchor is not
necessary.)
2. Attach the safety cable to the underside of
the mantle shelf with the screw provided.
3. Place the fireplace mantel close to the
wall.
4. Thread the wall anchor screw through the
other end of the safety cable and into the
wall anchor. Pull on the cable to make sure it
is secure.
5. Tighten each screw securely.
6. Inspect all fasteners regularly to make
sure they are secure.
Meijer.com