5
ASSEMBLY
STEP 1.
Thread two frame screws (2) through each plastic connector (1) and into pre-drilled holes
in panels C, C, D, and E. Secure with Phillips screwdriver. DO NOT OVER-TIGHTEN.
STEP 2.
Thread two frame screws (2) through each joiner plate (3) and into pre-drilled holes in
header panel F. Secure with Phillips screwdriver. DO NOT over-tighten.
C
You will need:
x 14
x 28
E
D
C
1
2
You will need:
x 2
x 4
F
3
2
2
3
2
2
REAR
REAR
Meijer.com