7
STEP 5.
Align joiner plates (3) of header panel (F) with panel assemblies (C/D and C/E). Thread a
frame screw (2) through each joiner plate hole and into pre-drilled holes in front panels. Secure with
Phillips screwdriver. DO NOT over-tighten.
STEP 6.
Set top panel (A) on top of side panel assemblies (C/D and C/E). Thread a frame screw
(2) through each plastic connector on side panel assemblies (C/D and C/E) and into pre-drilled
holes in top panel (A). Secure with Phillips screwdriver. DO NOT over-tighten.
2
You will need:
x 4
2
2
2
F
3
3
2
You will need:
x 4
2
2
2
A
Meijer.com