4
PREPARATION
A complete electric fireplace heater should consist of two parts; the wooden mantle and the
fireplace heater. Each is packed in a separate carton. Always use the fireplace heater with the
wooden mantle.
Remove all parts from the carton and place them on a clean, soft, dry surface. Check the parts list to
make sure nothing is missing. Dispose of packaging materials properly. Please recycle.
MANTEL PARTS
A – Top Panel (1)
A
B
C
C
D
E
F
G
B – Base (1)
C – Side Panels (2)
D – Right Front Panel (1)
E – Left Front Panel (1)
F – Header Panel (1)
G – Anti-tip Safety Kit
MANTEL and INSERT HARDWARE
1 - Plastic
Connectors (16)
2 - Frame
Screws (52)
3 – Joiner Plates (2)
4 - Insert Mounting
Clips (3)
5 - Insert Mounting
Screws (3)
Note: A Phillips screwdriver is required for assembly, but is not included.
Right and Left are as viewed
from the front of the mantel.
Please note: These images,
and the assembly step
images, show the mantel as
viewed from behind.
Meijer.com