PART 2 - User manual
19
Turning sheet
Attaching the turning sheet before use
1. Place the turning sheet in the middle of the bed
2. Press the edge strip of the turning sheet into the groove
on one of the bars; begin at the head end of the bed and
work your way down to the foot end.
What should I do if the turning sheet is rolled askew on the
bars?
Occasionally, the turning sheet will roll askew on the bars. As
such, this is insignificant and VENDLET Basic will still be opera-
ble.
This could result in creases in the turning sheet under the cli-
ent which is undesirable. Hence, we recommend that you aim
to smooth the turning sheet if the sheet is askew by more than
a hand’s width on the bars.
In this situation, you will have to slacken the sheet that has
been pulled askew and pull it in again while guiding / smooth-
ing it with your hand.
2.
3.
3. The turning sheet must always be placed OVER the bars to
prevent fingers, hair etc. of the client from getting caught
under the sheet. If the sheet is placed under the bars, the
pulling power will be reduced, and the motors will switch
off when the turning sheet is pulled in by the bar.
4.
Press the
or button on the hand control and allow
approx. two-thirds of the sheet to be pulled in by the bar.
5. Press the edge strip at the opposite edge of the turning
sheet into the groove on the other bar.
6. Use this bar to pull in the turning sheet by pressing the
or , button until the sheet covers the mattress even-
ly with the red line at the centre of the mattress.
7. The bars on the VENDLET Basic turn together. If the red
bar pulls, the blue bar starts slackening, and vice versa. If
you don’t want the sheet to be slackened at the opposite
bar, press both + simultaneously or +
simulta
-
neously.
Watch a video on how to attach the sheets
on our webpage www.vendlet.com
or scan the QR-code.
Содержание 6200000
Страница 1: ...VALUE IN CARING MANUAL BASIC ...
Страница 39: ......