Vendlet 6200000, Руководство пользователя

Страница: 14 / 40

PART 2 - User manual
14
Repositioning the client up in the bed
It is a well-known problem that clients often slide down to the
foot end, for example when the back support has been raised
– even if the knee break on the bed was activated before the
back support.
Typically, when a client slides towards the foot end, the turning
sheet follows the body of the client. In such situations, you
may use VENDLET Basic to move the client up in the bed again.
Work in a zig zag pattern moving the client diagonally from
side to side of the bed pulling the turning sheet on to the bar,
whilst guiding the sheet to the upper end of the bar.
3.
1. Lower the bars if they are raised.
2. Turn VENDLET Basic on by double clicking the button.
3. Stand next to the headboard and press the button to
slacken the turning sheet on the blue bar.
4.
1.
4. Gently guide the turning sheet to the upper end of the
blue bar while pressing the button to pull the client to
the side of the bed.
5. Stop when the client reaches the side of the bed and
repeat the procedure on the opposite side.
6. Continue this process until the client has been reposi-
tioned up in the bed.
7. Press the and button to slacken the sheet before
the client is left unattended in the bed.
Watch a video on how to reposition a
client higher up in bed
on our webpage www.vendlet.com
or scan the QR-code.