VendCo KARISMA, Установка - Использование - Обслуживание

Страница: 31 / 72

© by N&W GLOBAL VENDING S.p.A.
25
02-2014 4535 00
caPPucciNo maKEr wash cyclEs
Only models with cappuccino maker
the machine is designed to run wash cycles of the cap-
puccino maker (if any) and infuser unit.
-milker rinse: periodically, 15 minutes after no milk-
based beverage is dispensed, a milker rinse cycle is
carried of the duration of 60 seconds.
the selections with milk are inhibited until the milker
rinse is completed.
Before the machine starts the milker automatically a
notice with the countdown is displayed.
-cappuccino maker wash: the cappuccino maker is
washed using specific detergent.
the cleaning cycle is semi-automatic and you must
confirm the operation by pressing the
�
button.
The automatic washes do not exclude the need for
daily sanitization and periodic removal of the milker
nozzle.
sTEam disPENsiNg from sPouT
only models with steam spout
the steam spout is combined with a temperature probe
which allows to detect the temperature of the beverage
during the heating with steam.
to release the steam from the spout, press the "steam"
button, or, depending on the model, request the "steam"
selection.
the device delivers the steam (opening of the steam
solenoid valve EVLVAP) until the set temperature of the
beverage is reached (default 70°C).
the steam supply is interrupted regardless of the tem-
perature after 2 minutes of delivery.
You can stop the delivery by pressing the "steam" button
again (stop delivery function)
hoT waTEr disPENsiNg from sPouT
only models with hot water spout
to release the hot water from the spout, press the "Hot
water" button, or, depending on the model, request the
"Hot water" selection.
Depending on the programmed settings ("productivity"
parameter), the hot water spout (EVH2O) and flow rate
increase (EV2H2O) solenoid valves are activated
the machine delivers hot water:
-until the set amount is reached
-
until you press "Hot Water" (stop delivery function)
again
-until you release ""Hot Water" again
machiNE lighTiNg
the device has leDs for lighting the dispensing area
and the sides of the machine.
By default, the dispensing area leDs switch on when the
drink is being dispensed and remain on for a few sec-
onds after the end of the dispensing; however, the switch
on-time or steady-on of the leDs can be programmed.
the lighting of the sides of the machine is always active.