Battery Analysis
Routine
Chemistry
Used for:
Li-ion Charge
Lithium-ion
Lithium-polymer
Charging a lithium ion or lithium polymer battery.
Before using this routine, check that the default charge
voltage (4.2V) is appropriate for the battery otherwise
the battery can be damaged or explode.
Li-ion Test
Lithium-ion
Lithium-polymer
Cycling a lithium ion or lithium polymer battery to
determine its capacity. Before using this routine, check
that the default charge voltage (4.2V) is appropriate for
the battery otherwise the battery can be damaged or
explode.
SLA Charge
SLA, gel cell or
lead acid
Charging a sealed lead acid (SLA) or wet lead acid
battery. It uses a two step charge algorithm consisting
of a current limited charge to 2.40V/cell followed by a
float charge at 2.3V/cell.
SLA Test
SLA, gel cell or
lead acid
Cycling your battery to determine its capacity and
exercising it. It discharges the battery and then
charges it back up using a two step charge algorithm.
Datalog
N/A
Logging the voltage on the battery or accessory inputs
and logging temperature.
Cyclone Test
Cyclone Sealed-
Lead cells
Cycling a Cyclone Sealed-Lead cell. This routine
discharges the cell and then charges it back up.
Page 28
The UBA Let's Get Started Guide
