VENCHA Raven, Инструкция по эксплуатации

Страница: 12 / 19

Trouble Shooting
Problem Possible Cause Possible Remedy
Wobbles
Blade Screws are loose Check that all screws are securely tightened.
Do NOT overtighten.
Blades are loose Check all blades are aligned correctly and
securely fastened.
Blades are bent, out of shape Stack blades on flat surface, check all blades
are a uniform shape.
If blades are not uniform, contact your retailer
for replacement blades.
Rod hanger ball not correctly
seated in bracket Turn Fan Off and gently lift fan, rotate hanger
ball to its correct position in bracket.
Noisy Blade Screws are loose Check that all screws are securely tightened.
Do NOT overtighten.
Canopy touching ceiling Lower the top ceiling canopy so it doesn’t
make contact with ceiling.
Bracket not installed correctly Turn off fan, disassemble and re-install bracket if
not installed correctly.
Fan noise Allow for fan to settle in 4-8 hours of operating.
Ripple control signal noise Read Ripple Control.
Contact your licensed electrical contractor
and install a suitable signal filter.
Fan Not Working
Loose wires Turn fan off, check all connections at terminal
block
Circuit Breaker Blown Check circuit breaker. If circuit tripped, please
contact your licensed electrical contractor.
12