VENCHA Raven, Инструкция по эксплуатации

Страница: 11 / 19

10. Installing top canopy:
a. Softly coil all cables and gently tuck them around mounting bracket.
b. Raise top canopy, safely covering all cables, aligning canopy with the screw on hanger,
fasten it to the hanger and turn it counter clockwise to lock the screw.
Remote Control Operation Guide
1. Remote Pairing:
2. Buttons:
Screws
Screws
Mounting
Bracket
Canopy
a. Power on the fan and press and hold “OFF” button within 10 seconds.
b. Hold “OFF” button for 2-5 seconds until you hear a “beep” sound
confirming pairing.
c. Operate and test. Blades must be attached or fan will not continue.
*If pairing fails, please repeat steps. Hold remote close to receiver.
“OFF” Button Switches ceiling fan off
“S/W” Button Summer/Winter button to change fans spin direction,
forward and reverse
1-5 Speed Buttons Fan Speed Options: Fan Speed Options:
#1 – Lowest Speed (Night Mode)
#5 – Highest Speed
2H / 8H Timer Functions Preset timer for automatic fan and light stop.
2H – Fan turns off after 2 Hours
8H – Fan turns off after 8 Hours
Light Button
(If Light Kit Attached)
Button to control Light kit
On / Off – Turn Light on or off
On / Off / On (Within 3 sec) - for Light colour change
(3000K/4000K/5700K)
*Light will remember last light colour selected.
“+” “-“ Dimming Buttons Adjust the brightness of LED Lights
“+” – Increase the brightness of Light
“-“ – decrease the brightness of Light
11