background image

12.  Power supply “noise”, intermittent “humming”, or other influences from mains power delivery  

infrastructure. Signals sent through the power grid by the electricity provider for the control of off-peak 
hot water, street lights and other devices may cause an intermittent humming noise in your Vencha 
product. Filters for blocking & reducing such signals are available in Australia at the customer ‘s  
expense. These noises do not indicate the Vencha product is faulty.

13.  Damage caused by alternative power systems (for example: solar inverters, etc.).
14.  Water damage of any kind caused by inappropriate placement of fittings not IP rated for that  

location.

15.  The cost of renting, obtaining and using special access equipment (i.e. scaffoldings, scissor lifts, etc.) 

for accessing products installed at a height of greater than 3.0 meters.

16.  Transportation and in-transit insurance costs, if the product or parts thereof have to be returned for 

repair or replacement to the retailer or the authorized service agent.

17.  Non-structural corrosion damage of non-316 stainless steel components such as surface rust or minor 

rust.

18.  Except in the case of pre-packed integrated light models, light fittings attached to the fan are not 

covered by this warranty. Where the fan is pre-packed complete with a light, the light fitting will be 
covered by LIMITED REPAIR / REPLACEMENT WARRANTY.

19.  Faults deemed caused by a lack of regular maintenance, e.g. screws and nuts becoming loose.

5. Commercial Use:

This product is not designed or intended for industrial or commercial use.

Vencha products which are specifically designed for commercial use are designated as Commercial Use 
Products on the product packaging. 

16

Содержание Raven




















Отзывы: